2022 John Deere 9RX Series Scraper Special 9RX 590
Information
2022 John Deere 9RX Series Scraper Special 9RX 590
Engine HP1: 649 Max / 590 hp Rated
e18™ PowerShift Transmission
Choice of three different cab and visibility packages
Cab Suspension
Features may include:
PowerTech™ 13.6L (827-cu in.) engine: real world usability, not just power on paper
The muscle to handle heavy draft disks and rippers, power-hungry air seeders and planters, and large transport loads like grain carts and slurry wagons. The durable design and heavy-duty components you can depend on when you need to get in and get out. All in a Final Tier 4 (FT4) and Stage V compliant package. You get real-world power with the purpose-built 13.6L (827-cu in.) engines from John Deere Power Systems, standard in the 291 to 440 engine kW (390 to 590 engine hp) 9 Series Tractors.
We developed our newest power plant from a clean sheet of paper, starting with stronger castings, beefier bearings, and more robust internal components, all designed to meet the high demands of field operations. We replaced the fuel injectors with a high-pressure common rail (HPCR) fuel system and eliminated the diesel particulate filter (DPF) to boost to fuel efficiency and lower operation and maintenance costs. Integrated coolant and oil passages, along with a new belt-driven water pump, eliminate potential leak points and allow for a less-crowded engine compartment, improving serviceability and reducing debris accumulation.
In redesigning the engine, we also gave it:
Hydraulic valve lash adjusters to maintain valve-lash settings during engine operation, reduce valve train noise and wear, and allow for greater fuel efficiency.
A hydraulic fan drive for improved cooling capacity with no required maintenance.
A new integrated wiring harness design featuring a modular layout for reduced vibration, greater reliability, and easier service and diagnostics.
A rear gear train that integrates fully into the cast-iron block, reducing tiresome engine noise and improving the durability of the crankshaft damper.
Combination sensors where possible, meaning fewer sensors, connectors, and wires.
A powerful engine brake that allows operators to use the engine to control tractor and implement speeds while transporting or traveling downhill, reducing wear on the drivetrain brake components.
It all adds up to:
14 percent more power and 11 percent more torque
3 percent lower fuel consumption
10 percent lighter
27 percent reduction in mean repair time and an estimated $8,308 savings in service costs over the life of the engine
9 Series Visibility packages let you run with confidence, dawn until dusk
Visibility is more than just lighting. It’s mirrors where you need them, shades for the blinding late-fall and early-spring sun, wipers to help keep all the glass clear, and integrated camera capability. The new 9 Series Tractors let you choose the visibility package that best suits your needs – Select, Premium, or Ultimate with 360-degree light-emitting diode (LED) lighting –so you and your operators can run with all-conditions confidence.
John Deere integrated solutions: a world of connected technology, right from the factory
John Deere makes it easy for you to access an entire suite of connected applications, all designed to help you make the most of every seed, every hour, every gallon, and every bit of machine-related information.
Photos
Highlights
Glencoe, Ontario
2022
John Deere
9RX Series Scraper Special 9RX 590
John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 25 mph (40 km/h)
Inline / 6-cylinder / Wet-sleeve cylinder liners with four valves in-head
Level: Final Tier 4 (FT4) | After treatment type: Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Dual series turbocharger with fixed geometry first stage and variable geometry second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
B20 diesel compatibl
Diesel
John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 25 mph (40 km/h)
Total cold cranking amps: 3 x 925 CCA / Total: 2775 CCA
Size: 250 amp
Power boost: 10 percent | Interval for engine oil change: 500 hours | Interval for hydraulic/transmission oil change: 1500 hours | Interval for engine coolant change: 6000 hours
Closed-center, pressure-and-flow compensated
Available at a single rear SCV 1.9-cm (3/4-in.) couplers: 42 gpm (159 L/min)
Rated output: 110 gpm (416 L/min)
Drawbar support for short scraper drawbars
Number of rear selective control valves (SCVs): four 1.9-cm (3/4-in.) deluxe | Display Generation 4 4600 CommandCenter™: 10 in. (25.4 cm) | Cab glass area: 71.47 sq ft (6.64 m2) | Drawbar clearance: 12.2 in. (311 mm) | Front axle: 4.72 x 120 in. (120 x 3048 mm)
30 in. (762 mm)
162.4 in. (4125 mm)
Excluding hitch: 327.1 in. (8309 mm)
With brakes Group 47 or Group 48 tires: 19.8 ft (6.035 m)
400 U.S. gal. (1514 L) | Diesel exhaust fluid (DEF) tank: 31.7 U.S. gal. (120 L)
Inner cab: 115 cu ft (3.27 m3)
Crankcase volume: 16.9 U.S. gal. (64 L)
14.9 U.S. gal. (56.5 L)
Transmission-hydraulic system: With 3-point hitch and PTO: 59 U.S. gal. (223 L)
Base machine: 56,320 lb (25,546 kg) | Maximum ballast level: 62,000 lb (28,123 kg)
Approximate, Open;Cab: 56,320 lb (25,546 kg)
Working: 18 halogen | Type of bulb in headlight (Halogen, Zenon, LED): halogen, 65 W
SCV control: Electronic | Sensing type: Electrohydraulic with draft sensing | Midrollers: Two | Radio: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna | Guidance: Integrated AutoTrac™ | Telematic: Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination) | Remote diagnostics: Available with activated JDLink hardware and activations
Degree of seat swivel, left hand 25 degree (angle) / Degree of seat swivel, right hand 40 degree (angle) / Air suspension