2024 John Deere Air Drills N560F

Information

2024 John Deere Air Drills N560F

  • Handle tough no-till conditions with ProSeries™ Opener
  • See the flow rate of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring
  • Accurate seed placement & emergence with TruSet™ in-cab "closed loop" downforce pressure control

Features may include:

  • The Total Seeding Solution – experience the John Deere advantage
  • John Deere has the seeding solutions that go above expectations with a complete line of everything needed in small grains. Offering a variety of openers for your chosen practice in a variety of configurations and sizes. All with integrated technology throughout the seeding train allows for effortless setup and seamless documentation.
  • Setting up a John Deere seeding train is quick and easy with the plug and play technology. All data and technology operate through the Gen 4 display and ultimately up to John Deere Operation Center™ that can be viewed from anywhere at any time. Not only does the complete John Deere seeding solution all operate through one display but it eliminates the difficulty and time-consuming tasks of setting up extra displays and harnesses.
  • With a complete John Deere seeding solution, there are multiple different onboard and offboard technologies shown below that improve the overall seeding production step. Many of these technologies are exclusive to John Deere. Each of these technologies bring different customer value that overall lead to the ultimate John Deere seeding solution!
  • Improve confidence and while reducing maintenance with the new AccuRate™ metering system
  • Combination of stainless steel and composite materials ensure an entire corrosion resistant system
  • Individual electric meters allowing for more precise seeding
  • Up to 8x more accurate prescriptions with high fidelity prescription
  • Start and stop each meter with SectionCommand™ Pro
  • Accurately meter the correct amount of product on a curve with curve compensation
  • Color-coded hydraulic hose handles
  • These color-coded aluminum hydraulic hose handles make connecting hydraulic hoses from the air seeder and air cart to the correct Selective Control Valve (SCV) on the tractor easier than before. The anti-slip makes it easy to grip the hose and connect or disconnect from the back of the tractor. Each color is laser engraved with the John Deere logo and extend/retract icons to ensure proper matching to the proper function.
  • Easily identify function of each hose
  • Consistently match hose handles colors to rear couplers on tractor
  • Easy to grip for connecting or disconnecting to the SCV
  • Base equipment on all trailing air carts
  • Base equipment on all seeding tools
  • Confidence in rates from row to row with RelativeFlow™ Blockage sensing
  • With RelativeFlow Blockage sensing, operators can see the flow of both seed and fertilizer from inside the tractor cab. Sensors on all secondary hoses monitor the relative product flow row to row, giving you a better view of the flow rate of both seed and fertilizer from the cart to the opener from inside your tractor cab. This technology can help you identify any problems before a potential blockage occurs.

Photos

Highlights

  • Glencoe, Ontario
  • 2024
  • John Deere
  • Air Drills N560F
  • Available
  • 10.97 m (36 ft) | Nominal inner wing width (between wing-fold pivots): 4.14 m (13.59 ft) | Centerframe: 4.55 m (14.9 ft)

Specifications

  • 2024
  • John Deere
  • Air Drills
  • N560F
  • Seed Drill
  • Mainframe: (8) 42.1x 21.7x 22.5 in. 12PR | Wings: (16) 33x15.5-16.5 in. 10PR
  • Packing force: 2.3 to 21 kg (5 to 45 lb) | Down force 12 to 20 kg (26 to 43 lb)
  • Down: 75 to 181 kg (165 to 400 lb)
  • bolt pattern: Duals with eight-bolt wheels
  • Seed spacing: 254 mm (10 in.) / Separate fertilizer: 508 mm (20 in.) | Seed, ProSeries™ single-disk blade: 45.72 cm (18 in.) / Angle: 7 degree (angle) | Road clearance: 21.59 cm (8.5 in.) | Cross members 102 x 152 mm (4 x 6 in.) / End tubes: 51 x 152 mm (2 x 6 in.) / Hitch: 152 x 254 mm (6 x 10 in.) | Clearance from rank to rank: 134.11 cm (52.8 in.) | Gauge wheel size: 11.43 x 40.64 cm (4.5 x 16 in.) | Range: 1.27 to 8.89 cm (0.5 to 3.5 in.) | Increments: 0.64 cm (0.25 in.) | Furrow closing Size: 2.54 x 30.48 cm (1 x 12 in.) | openers: 45.7 cm (18 in.) | Fertilizer, single-disk blade: 45.72 cm | Diameter: 45.72 cm (18 in.) | Tapered: 2.54 x 22.86 cm (0.75 x 9 in.)
  • 11.6 m (38.17 ft)
  • 5.7 m (18.83 ft)
  • 5.2 m (16.92 ft)
  • 18.3 m (60 ft)
  • 10.97 m (36 ft) | Nominal inner wing width (between wing-fold pivots): 4.14 m (13.59 ft) | Centerframe: 4.55 m (14.9 ft)
  • before ballast: 28,213 kg (62,200 lb) | Available ballast: 1,451.5 kg (3,200 lb)
  • Number of ranks: Two seed ranks and one separate fertilizer rank | Number of sections: Three
  • Seed, ProSeries™ single-disk blade