2024 John Deere Air Drills 730

2024 John Deere Air Drills 730

• See the flow of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring

• Double-disk openers offer precise depth

• Three tool widths and two seed row spacings

• Field Doc™ and Map-Based Prescriptions

Features may include:

• Double-disk openers offer precise depth

• The 34.3-cm (13.5-in.) diameter double-disk openers are offset to create a narrow furrow for optimal seed placement. They feature aluminum boots and have a long-arm/short-arm stagger for residue clearance. Either 15.2-cm (6-in.) or 19-cm (7.5-in.) row spacing is available.

• The 6-mm (1/4-in.) offset creates a leading edge and pinch point that is close to the soil surface for optimal penetration and residue cutting. Alternating of the blades with right and left leading edge prevents side drafting and leaves the field smooth with minimal soil throw.

• Depth-gauging press wheels give accurate seed placement

• Depth-gauging press wheels:

• Allow quick, easy opener depth control

• Assist in controlling furrow depth

• Promote positive seed-to-soil contact for good germination

• Adjustments can be made from 0 cm (0 in.) to 9 cm (3.5 in.) by increments of 6 mm (1/4 in.)

• 730 Level-Lift™ frame handles moderate residue with faster working speeds and consistent depth control

• The 730 Level-Lift Air Disk Drill frame is very similar to the 2210 Level-Lift Field Cultivator. The 730 LL Air Disk Drill is a secondary tillage and seeding tool, an industry exclusive from John Deere. This frame is designed to offer durable support for the double disk openers while providing flexibility over level to gently rolling terrain.

• Frame components include:

• Front-mounted rockshaft

• Tube-Thru-Tube frame

• Hose and wiring harness support and protection

• Faster working speeds and consistent depth are results of the above features.

• The 730 Level-Lift frames are:

• Constructed of continuous five-bar Tube-Thru-Tube frame

• 10.2-cm x 10.2-cm (4-in. x 4-in.) cross members

• 7.6-cm x 15.2-cm (3-in. x 6-in.) centerframe hitch tubes

• 5-cm x 12.7-cm (2-in. x 5-in.) end tubes

• The large frame member sizes, joint welds, and the wheel module placement add to the structural integrity, providing stable, consistent front-to-rear and side-to-side operation.

• The frame:

• Is 3.4-m (11.2-ft) deep frame (fore-aft)

• Has 61-cm (24-in.) under-frame clearance

• Can handle residue amounts of up to 40 percent

• The wings flex 7 degree up and down. They fold over center for a compact transport or storage profile.

• The front-mounted rockshaft:

• Offers superior front-frame strength for unmatched side-to-side levelness

• Provides torsional rigidity for the hydraulic system

• Opens up the frame for true shank placement, improving overall residue flow

• The TruPosition™ shanks have a trip force at 90.7 kg (200 lb) and a 25.4-cm (10-in.) trip height.